Cleartec

CLEARTEC wastewater treatment units are specifically designed to remove suspended solids from both construction site rainwater runoff and selected industrial wastewater. The chemical process reduces the suspended solids content below 50 mg/litre so that the treated water can be either discharged into the public drainage system or recycled for further use. The residual sludge, which is formed by the reaction between the suspended solids and the dosing chemicals is discharged automatically.

Each model only requires single phase power and is driven by a submersible pump (supplied separately) located in a separate sedimentation tank. For the smaller models (AU 10 to AU 40), the submersible pump power line Typical Influent Typical Effluent can be connected directly into the single phase power Control Panel of the CLEARTEC.

The treated water can be reused for vehicular washing bays, recharge of wells, toilets, cube curing, ponding tests etc. thereby reducing water costs.

There are several models available with treatment capacities ranging between 10-80m³/hour and are fully automatic including chemical injection & sludge discharge.